Н0 BR10 Roco 62190 installation of light




Alles rund um Digital-Themen, sofern sie nicht speziell nur ein Digitalprotokoll betreffen wie DCC, MFX oder den S88-Bus. Für diese dann das jeweilige Unterforum verwenden.

Moderatoren: HF110c, oligluck

Н0 BR10 Roco 62190 installation of light

Beitragvon M.W. » Do 3. Mär 2016, 18:47

Hi,
As it is known there are two options of this model, 62193 (a dynamic smoke, illumination of wheels, light in a cabin, the sound decoder) and simplified 62190 (without decoder and a smoke).

We take a board of the locomotive and we study



It appears that a board bare (there are no LEDs for illumination)



ohm out




Bild


It becomes clear that illumination of wheels on 21 pin, and light in a cabin on the 2nd pin

We solder LEDs 0603 and resistors of 2 kOhms on a board




Now we do light in a cabin. We do a small board with resistors and the connector and we solder to a locomotive board



Now we put a board on a place and we fix on a double-side adhesive tape





we solder wires and the connector to a LED and we paste on a polystyrene slice



In the cabin there is a standard place where to be put an original board (the article 130804 for the order - €11,60)



and simply we insert our self-made board



it's all

If you have the programmator, it is necessary to set up a mapping






As a result we receive






Gruß
Michail
Benutzeravatar
M.W.
Hilfsschaffner
 
Beiträge: 95
Registriert: Mi 2. Mär 2016, 19:34
Wohnort: Moscow (Russland)

von Anzeige » Do 3. Mär 2016, 18:47

Anzeige
 

Zurück zu Digitalbetrieb

Wer ist online?

0 Mitglieder

cron